ACCESSORIES - Xtender Series
Make enquiry
Features
RCC-02 Remote Control and Programming Centre
The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.
Thanks to its digital display, the RCC-02 provides clear and comprehensive indications on the state of the system in the chosen language.
The device memorizes the events that occurred on an installation and therefore anticipates any future problems.
A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.
Meant for wall mounting.
Dimension H x L x l: 170 x 168 x 43.5 mm.
Supplied with 2 m cable (max. 50m).
RCC-03 Remote Control and Programming Centre
Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language.
The device memorizes the events that occurred on an installation and therefore anticipates any future problems.
A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.
Meant for panel mounting.
Dimension H x L x l: 170 x 168 x 43.5 mm.
Supplied with 2 m cable (max. 50m).
Battery Status Processor BSP
The remote control RCC-02/03 provides the display, the data logging, the graphical display of the state of charge history and the settings. Values of the BSP can be used in the programming of the Xtender, VarioTrack and VarioString system. Besides, 17 different values can be displayed like for instance:
- State of charge
- Voltage
- Current
- Time to go
- Throughput energy
- Battery temperature
The BSP is offering a voltage measuring for 12, 24 and 48 V batteries and a current measuring by resistive shunt.
Two models of BSP are available:
BSP 500 (with a shunt of 500 A)
BSP 1200 (with a shunt of 1200 A)
Dimension H x L x l: 110.5 x 75 x 26 mm.
Cable length for the battery connection: 2 m
Supplied with a 5 m communication cable and a shunt of 500A (for the BSP 500) or of 1200A (for the BSP 1200).
Communication module Xcom-232i
The communication module Xcom-232i, equipped with a serial port RS-232, enables to be informed of the state of a system consisting of one or several Xtenders, VarioTracks or VarioStrings.
It is then possible to read all data that can be displayed on the remote control basic screen and also to modify the configuration parameters. An Xtender, VarioTrack or VarioString system can therefore be connected to various SCADA control and supervision devices (PC, programmable logic controller, and microcontroller).
From a more technical point of view, the electrical interface RS-232 allows for instance the data transmission with GSM modems, RS-232 bridges to TCP/IP or also with long distance converters RS-422. Besides, in order to secure a total electrical separation between the Xtender, VarioTrack or VarioString system and the control and supervision device, the port is protected by means of a galvanic isolation.
The module Xcom-232i is also having a function of data recording and analysing (Data logger function).
If you have no serial port RS-232, there is a version with CAN bus.
Dimension H x L x l: 110.5 x 75 x 26 mm.
Supplied with a 2 m communication cable.
Communication sets by internet with Xcom-LAN / Xcom-GSM
Xtender, VarioTrack and VarioString systems can now be constantly controlled from any remote terminal, computer, tablet or smartphone. The communication sets Xcom-GSM and Xcom-LAN allow connecting to sites with GSM mobile coverage or with internet-connection over a local network.
Studer Innotec provides this «plug-and-play» solution using a secure server and a simple and user-friendly interface.
The interface allows for remote interaction with the installation exactly as if on-site with the remote control RCC-02/-03, including: access to all parameters, real-time display of measured data of all devices included in the system and access to the last 30 days of log files.
Furthermore this solution makes it possible to consult the system’s event log at any time. It also allow users to configure alarm messages to be sent to one or more persons by e-mail or SMS. Any loss of internet connection can be indicated.
Xcom-LAN or Xcom-GSM?
Studer Innotec offers two different communication sets for providing access to the installation via internet. The available means of communication at the location of the installation will determine which set to choose.
If the installation has access to internet through a local area network (LAN), choose the Xcom-LAN set. If there is no available connection to the internet but access to a GPRS or 3G mobile network*, choose the Xcom-GSM set.
* the compatibility should always be verified with the mobile phone network operator
Communication set Xcom-LAN
The set includes one Xcom-232i, one Ethernet port and all necessary accessories
Communication set Xcom-GSM
The set includes one Xcom-232i, one cellular modem and all necessary accessories. The SIM card is not provided.
Communication module Xcom-SMS
The easiest access to remote energy systems
Xtender and/or VarioTrack/VarioString systems can now be constantly controlled from a mobile phone or smartphone from anywhere in the world. The communication device Xcom-SMS allows for connections to sites with a GSM (2G) coverage.
The Xcom-SMS is a cost effective add-on to your system easy to install and a plug-and play solution. It provides a secured access to your installation by the simplest way: sending or receiving SMS to your remote power system.
Its extended features include:
- Periodic or on demand operating reports
- Selectable system´s event/alarm messages
- Start / Stop the device
- Control the auxiliary relays
- Access to the parameters (Read & Write)
- Reading the system information data
- Changing the access code
- Periodic reports and system alarms
- Datalogging on SD card
With the Xcom-SMS and a local prepaid SIM card (not supplied), there is no need for internet access and/or fast 3G/4G connection to securely have the full control of the targeted energy system: A basic GSM (2G) coverage in enough to simply send your demand by SMS and get a reply within seconds!
So easy, so secure! A must in every system, brings added value through full remote control!
... With a simple prepaid SIM card ...
Multi-protocol communication module Xcom-CAN
This tool enables the communication between BMS, Lithium Battery Management Systems, and products of the Xtender / VarioTrack / VarioString family. The list of batteries (manufacturers) compatible is available on request at Studer-Innotec. The Xcom-CAN makes it also possible for any device with a CAN bus (PC, PLC and microcontroller) to interact with all products of the Xtender / Vario family via a proprietary protocol. Like having the system controlled by a supervisor (SCADA) while giving the third system an access to all data (configuration parameters and datalog).
X-Connect Multi Xtender System
The pre-wired mounting offers a flexible and cost effective solution for high power systems (up to 63 kVA) based on the XTH inverter/charger.
The frame is supplied with :
- Pre-installed DC circuit breakers.
- Pre-installed DC fuses.
- Pre-installed DIN rails.
- Interconnection pipes and gland for auxiliary contact wiring.
- Interconnection pipes and gland for AC wiring.
- Interconnection pipes and gland + 90 mm2 wire terminated with appropriates ring tongues for DC wiring from Xtender to breakers and fuses.
Communication Cable for multi-unit Systems
Several Xtenders, VarioTracks and VarioStrings can therefore be used in the same installation to make either a 3ph system, to increase the power of one phase, or both.
Up to 9 Xtenders,15 VarioTracks and 15 VarioStrings can then be combined, offering a power max. of 72 kVA and 75kWp for the VarioTracks and 105kWp for the VarioStrings.
RCM-10 Remote Control Module
Main on/off of the inverter (Achieved by connecting a potential free contact between terminals 1 and 2)
Function input (Driven by a dry contact between terminals 5 and 6, with a bridge between terminals 3 and 4 or by an AC or DC voltage of max 60 Veff between terminals 4 and 5)
Rail DIN mounting.
Dimensions (h x l x w): 45 x 73 x 45 mm.
Supplied with 3 m cable (length max. 5 m).
BTS-01 Battery Temperature Sensor
Dimensions: h x l x w: 58 x 51,5 x 22 mm.
Supplied with 5m cable.
External cooling fan (IP54) ECF-01
Dimensions of the XTS with the ECF-01 (HxLxw): 115 x 221 x 370 mm.
Supplied with 2 fixing screws.
Auxiliary relay module ARM-02
This module, only meant for the XTS and for the VT/VS models and for rail DIN mounting, is equipped with 2 auxiliary contacts controlled by the XTS or by the VT/VS. This function is already integrated in the models XTM and XTH.
Suited for DIN rail mounting.
Dimensions (HxLxw): 45 x 73 x 45 mm.
Supplied with 3 m cable (Max. length 5 m).
Integration services
At VxI Power we believe that providing a power supply is a small part of our service to the customer. Our extensive battery knowledge and mechanical design capability enable us to provide turnkey solutions for your DC standby application.
We have the on-site ability to supply all of the units we manufacture in a cabinet or rack.
cabinets & racks
